How to make a children's book
How to make a children's book, from the first idea to a printed copy: pick a reader age, write a short story that turns pages, plan 32 pages, choose how the pictures get made, lay it out with bleed and publish it on Amazon KDP.
By KDPBook Editorial · Updated · Checked against KDP Help
Key takeaways
- To make a children's book, pick an age band, write a short story (picture books commonly run 500 to 700 words over 32 pages), plan it spread by spread, illustrate it, lay it out with bleed, then publish.
- The 32-page picture book is a convention, not a KDP rule. KDP prints premium color paperbacks from 24 pages.
- Character consistency is the hardest part of illustration, whether you hire an artist, draw it yourself or use AI.
- Full-bleed art needs 0.125 in of extra image on the outside edges. An 8.5 x 8.5 in book is set up at 8.625 x 8.75 in.
- If any text or art is AI-generated, KDP requires you to say so when you publish.
On this page
Make a children's book for one age band
Before you write a word, decide who the book is for. A book for a three-year-old on a lap and a book for a seven-year-old reading alone are different objects. The age band sets the length, the vocabulary, how much the pictures carry and even the trim size.
| Format | Typical reader | Commonly used length | Pictures |
|---|---|---|---|
| Picture book | Read aloud to young children | 500 to 700 words over 32 pages | On every page, full color |
| Early reader | Starting to read alone | Short, controlled vocabulary | On most pages |
| Chapter book | Ages 6 to 9 | 1,500 to 10,000 words, some to about 12,000 | Often heavily illustrated, often black and white |
A good picture book story is small and concrete. One child, one want, one problem, and a few attempts that go wrong before the ending lands. Read it aloud. If a sentence makes you stumble, a parent at bedtime will stumble too. Cut anything the picture can show: you do not need to write that the dog is brown if the art shows a brown dog.
“Most traditionally published picture books land somewhere between 500 and 700 words, spread over 32 pages”
That works out to roughly 16 words per page once you take away the title and copyright pages. Self-published books can break the range, but readers and parents have a feel for it, and a 2,000-word picture book usually reads as too long.
Why picture books have 32 pages
Offset printers fold large sheets into groups of pages, and 32 pages fits that system neatly, so the format became the industry habit. It also matches the attention span of a read-aloud session. Not all 32 pages hold story. The title page, copyright page and sometimes a dedication come first, so you have closer to 28 pages, or about 14 spreads, for the story itself.
On KDP you are printing on demand, not on a press, so 32 is a habit rather than a requirement. A premium color paperback can have as few as 24 pages. Most authors still use 32 because it feels right in the hand and gives the story room to breathe.
Make a picture book dummy
A dummy is a rough mock-up of the book. Fold eight sheets of paper in half, staple them, and you have 32 pages. Number them, then sketch each spread with stick figures and pencil in the text. It shows you three things a manuscript cannot: where the page turns fall, whether each spread has something new to look at, and whether the words fit around the pictures.
- 1
Split the text into spreads
Break the manuscript into about 14 chunks, one per spread. Each chunk should move the story one step.
- 2
Put a reason to turn on every right-hand page
A question, a door about to open, a sentence that ends mid-thought. The page turn is the reveal.
- 3
Sketch the picture first, then place the words
Leave a quiet area of sky, floor or wall for the text. Keep text away from the gutter in the middle of the spread.
- 4
Read the dummy aloud, turning pages
You will hear dead spreads and rushed endings. Fix them now, before any art is made.
Illustration options: hire, draw or use AI
Pictures carry half of a picture book. You have three routes, and each one trades money, time and control differently.
| Route | Strengths | Trade-offs |
|---|---|---|
| Hire an illustrator | A real artist, a unique style, judgment about page turns and composition | The most expensive route and often months of work. Agree in writing on rights and print use. |
| Draw it yourself | Full control and no illustration bill | Takes long hours, and the art has to hold up next to professional books on the shelf. |
| Use AI illustration | Fast drafts, easy to redraw a page, low cost per image | Characters drift between pages unless the tool controls for it. You must disclose AI images to KDP. |
Whatever route you pick, character consistency is where books fall apart. Your hero needs the same face, hair, colors and clothes on page 4 and page 28. Illustrators handle this with a character sheet: the character drawn from the front, side and back with a fixed color palette. Ask for one before any page is drawn. If you use AI, use a tool that works the same way. In the AI children's book generator, each character gets a reference sheet you approve first, and every page is drawn with those sheets as references. If one page drifts, you redraw just that page.
Lay out the pages with bleed
Picture book art usually runs to the edge of the page. To print that cleanly, KDP needs bleed: the image extends 0.125 in (3.2 mm) past the trim on the top, bottom and outside edge, so the cutting blade never leaves a white sliver. With bleed, the page is 0.125 in wider and 0.25 in taller than the trim. If one page bleeds, the whole interior must be set up with bleed.
- Trim size
- 8.5 x 8.5 in
- Width with bleed
- 8.5 + 0.125 = 8.625 in
- Height with bleed
- 8.5 + 0.25 = 8.75 in
- Outside margin for text (with bleed)
- at least 0.375 in
- Inside (gutter) margin, 24 to 150 pages
- 0.375 in
- PDF page size to export
- 8.625 x 8.75 in
Keep all words and faces inside the margins. Anything closer to the edge may be trimmed, and anything in the gutter disappears into the fold. Export the interior as one PDF with images at 300 DPI at their printed size.
Make children's books ready for KDP
KDP lets you self-publish eBooks, paperbacks and hardcovers for free. For a full walkthrough of the account, upload and review steps, see how to self-publish on Amazon KDP. Here are the choices that matter most for KDP children's books.
- Trim size. Picture books are often square or landscape. KDP offers 8.5 x 8.5, 8.25 x 8.25, 8 x 10 and 8.25 x 6 in, among others. All of these count as large trims, which print at a higher cost. See all KDP book sizes.
- Ink and paper. Use premium color on white paper. Standard color needs at least 72 pages, so it does not fit a 32-page book. KDP notes that color books print on white paper, which shows higher contrast for images.
- Cover finish. KDP describes glossy as typical for children's books.
- Hardcover. KDP hardcovers start at 75 pages, so a 32-page picture book can only be a paperback there.
- Kindle. A picture book suits a fixed-layout eBook, so every page looks like it does in print.
- Printing cost (large trim, 24 to 40 pages, flat)
- $4.20
- List price
- $12.99
- Royalty rate (list price $9.99 or more)
- 60%
- 60% x $12.99
- $7.79
- Minus printing cost
- $7.79 - $4.20
- Royalty per copy
- $3.59
Price below $9.99 and the rate drops to 50%. At $9.98 the same book earns about $0.79 a copy. Try your own numbers in the KDP royalty calculator.
“We require you to inform us of AI-generated content (text, images, or translations) when you publish a new book.”
KDP defines AI-generated content as text, images or translations created by an AI-based tool, and it stays AI-generated even after heavy edits. If you wrote the story yourself and only used AI to check or polish it, that is AI-assisted, which you do not have to disclose. Our page on KDP AI content rules covers the details.
How do you make a chapter book?
A chapter book is the step after picture books, for children reading on their own. Emma Walton Hamilton, a children's book editor, describes them as typically written for readers ages 6 to 9, with short chapters and simple sentences, and often heavily illustrated.
- Keep chapters short, so a child can finish one in a sitting, and end most of them on a small hook.
- Use a series-ready hero: a clear voice, a best friend, a world that can hold more adventures.
- Aim for the common range of 1,500 to 10,000 words, with some stretching to about 12,000.
- Use spot illustrations, often in black and white. That means black ink on white paper, which costs far less to print than premium color.
- Use a regular trim such as 5.5 x 8.5 or 6 x 9 in. Text reflows on Kindle, so the eBook can be reflowable with images.
How to make a children's book online with AI
You can now make a children's book online without design software. The honest version of how this works: AI is good at drafts, layout and fast redraws. It is not a substitute for your taste. You still decide what the story is about, read every page aloud and reject the pictures that are wrong.
- 1
Describe the story
A sentence or two: who the hero is, what they want, and the reader age. Or paste your own manuscript if you have written it already.
- 2
Edit the text page by page
Read the outline and each page of text before any picture is drawn. This is the cheapest moment to change your mind.
- 3
Approve the characters
Check the reference sheets for each character. This is what keeps the hero the same on every page.
- 4
Illustrate and lay out
Each page is drawn with space left for the words, then placed at print size with bleed.
- 5
Download and publish
You get an interior PDF, a wrap cover and a Kindle file, and you upload them in your own KDP account.
There are a few ways in, depending on what you have. If you have only an idea, use the children's book maker. If you want bedtime story collections or a personalized story, try the story book creator. For novels, guides and other book types, start from the AI book generator.
When the interior is done, you still need a cover sized to your page count. Our guide to designing a book cover walks through the spine, the barcode area and the export settings.
Frequently asked questions
How many words should a picture book have?
Most traditionally published picture books run about 500 to 700 words over 32 pages, according to the SCBWI blog. Books for the youngest readers are often shorter. Treat the range as a guide, not a rule.
Do picture books on KDP have to be 32 pages?
No. KDP prints premium color paperbacks from 24 pages. 32 is the industry convention, and many authors keep it because readers expect that length.
What size should a children's picture book be on KDP?
Square sizes such as 8.5 x 8.5 or 8.25 x 8.25 in and 8 x 10 in are common choices. All of them are large trims on KDP. Choose the size before the art is made, because the art has to be drawn for that shape.
Can I make a children's book with AI and sell it on Amazon?
Yes, as long as the book follows KDP content guidelines and you disclose AI-generated text or images when you publish. You are responsible for checking that all of the content meets those guidelines.
Can I make a hardcover picture book on KDP?
Not at 32 pages. KDP hardcovers need at least 75 pages, so a standard picture book is published as a paperback and an eBook.
What is a picture book dummy?
A rough, stapled mock-up of the book with sketches and text on each page. It shows you the page turns and pacing before you pay for or make final art.
How long is a chapter book?
Chapter books are typically for readers ages 6 to 9 and commonly run 1,500 to 10,000 words, with some reaching about 12,000, split into short chapters.
Sources
- SCBWI blog: The Power of Less (picture book word counts)
- Emma Walton Hamilton: Chapter Books vs. Middle Grade
- KDP Help: Paperback and hardcover trim sizes, bleed and margins
- KDP Help: Paper and ink options
- KDP Help: Printing cost
- KDP Help: Paperback royalty
- KDP Help: Content guidelines (AI-generated content)
- KDP Help: Self-publishing basics